Beta Firmware / Alpha Driver

Content

Devices with supported strang visualization

The compatibility spectrum of Solar-Log keeps growing!

We would like to offer you a steady increase in the number of compatible devices for our energy management and monitoring solution. This means that we develop and constantly update a large number of device drivers.

Whereas a few years ago there were only a handful of devices with which the system had to be compatible, today there are well over 300 different devices with which the Solar-Log Base device family is compatible and the number is constantly growing.

In order to be able to offer you more compatible devices as quickly and easily as possible, we have adapted our development steps and are now releasing new device drivers in two different ways for more compatibility in less time.

Beta Firmware Description

Beta firmware contains drivers that have been handed over from the development department to a special test team and have been structured and extensively tested by this test team on one or more installations. These drivers are available in the beta firmware, documented in the beta release notes and for them, there are the corresponding installation instructions. These drivers can be used directly by our customers and are available in the coming table of the present entry.

Currently known problems for which we develop a solution:

Beta-Firmware 5.1.1

Fronius Gen24:
Communication problems when selecting SunSpec Model Type "float".
Sungrow:
Communication problems with Sungrow inverters.
Janitza UMG 96-PA-MID+:
Supported via RS485.

Alpha Driver Description

Alpha drivers are drivers coming directly from the development department. They have undergone internal software-based testing there, have completed the internal Solar-Log GmbH driver test tool and have been tested with a software simulator. The classification as an alpha driver is usually made when no direct test installations are available. The corresponding alpha driver can be requested by our customers for a beta test, via email. The tests are accompanied by our beta test team to ensure that all functions are guaranteed in the system. It may happen that we need a few days lead time to provide the appropriate resources in the development department.

Alpha drivers for which we are looking for specific test plants:

Fronius Gen24:
Devices via RS485, connected to the Solar-Log Base + SunSpec Model Type "float" configured.

Only available on request, please contact us directly.

Ideally, you should tell us right away in the text field when the installation is to take place so that we can schedule this accordingly.

Beta Firmware

Filename	Firmware	Solar-Log™ Model	Release Date	Release Notes (DE / EN)
firmware_base_5.1.1-155-beta211115.bin	5.1.1-155	Base	15.11.2021	Solar-Log_ReleaseNotes_Beta_511_155_15112021_DE_EN.pdf
firmware_sl50_4.2.7-116_beta20210930.bin	4.2.7-116	SL50	30.09.2021	Solar-Log_ReleaseNotes_Beta_sl50_4.2.7-116_20210930_EN.pdf
firmware_2000_4.2.7-116_beta20210930.bin	4.2.7-116	SL 4.Generation	30.09.2021	Solar-Log_ReleaseNotes_Beta_2000_4.2.7-116_20210930_EN.pdf
Special Firmware
firmware_base_5.1.1-155_20201221_refu.bin	5.1.1-155	Base	21 Dec 2020	firmware_base_5.1.1-155_20201221 Refu.docx
firmware_sl50_4.2.7-116_20210218_refu.bin	4.2.7-116	SL50	18 Feb 2021	firmware_sl50_4.2.7-116_20210218 Refu.docx

Devices with supported strang visualization

Strang visualization

Manufacturer	Inverter type / model(s)	Firmware / Version
DELTA	M15A Flex, M20A Flex, M30A Flex, M50A Flex, M70A Flex
Huawei	Huawei Modbus 485 Hybrid
Huawei	Huawei Modbus 485 PV
Huawei	Huawei Hybrid SUN2000-L Series
SMA	SMA Sunny High Power Peak 3
SMA	SMA Sunny Boy Storage
SMA	SMA Sunny Tripower Core2	Beta-Firmware / 5.1.1-Build 155
Sungrow	Sungrow CX Series: SG36CX, SG60CX
Sungrow	Sungrow HX Series (Ethernet): SG125HX, SG250HX
Sungrow	Sungrow RT Series: SG3.0RT, SG4.0RT, SG5.0RT, SG6.0RT, SG7.0RT, SG8.0RT, SG10RT, SG12RT, SG15RT, SG17RT, SG20RT

Alpha Driver

Supported Components as Alpha Drivers

Inverter / components:

ABB:
PVS-175

FIMER:
PVS-175

Goodwe Hybrid

Huawei Hybrid - compatibility extended for SUN2000-L Series models.
(In the implementation of the data channels, Solar-Log assumes the following technical configuration of the hybrid inverter: 2 strings have been assigned per MPPT).

Huawei Modbus 485 Hybrid:
SUN2000-2KTL-L0, SUN2000-2KTL-L1, SUN2000-3KTL-L1, SUN2000-4KTL-L1,
SUN2000-4.6KTL-L1, SUN2000-4.95KTL-L1, SUN2000-5KTL-L1, SUN2000-6KTL-L1,
SUN2000-3. 8KTL-USL0, SUN2000-5KTL-USL0, SUN2000-7.6KTL-USL0,
SUN2000-9KTL-USL0, SUN2000-10KTL-USL0, SUN2000-11.4KTL-USL0,
SUN2000-10KTL-M0, SUN2000-10KTL-M0, SUN2000-10KTL-M1,
SUN2000-12KTL-M1, SUN2000-4KTL-L0

Huawei Modbus 485 PV:
SUN2000-8KTL-M2, SUN2000-175KTL-H0, SUN2000-185KTL-INH0, SUN2000-193KTL-H0
SUN2000-196KTL-H0, SUN2000-215KTL-H0, SUN2000-168KTL-H1, SUN2000-185KTL-H1
SUN2000-196KTL-H1, SUN2000-200KTL-H2, SUN2000-196KTL-H3, SUN8000-500KTL
SUN2000-15KTL-M3, SUN2000-17KTL-M3, SUN2000-20KTL-M3, SUN2000-20KTL-M3
SUN2000-23KTL-M3, SUN2000-24.5KTL-M3, SUN2000-25KTL-NAM3, SUN2000-28KTL-M3
SUN2000-29.9KTL-M3, SUN2000-29.9KTL-M3, SUN2000-30KTL-M3, SUN2000-30KTL-M3
SUN2000-30KTL-M3, SUN2000-30KTL-NAM3, SUN2000-33KTL-NAM3, SUN2000-33KTL-NHM3
SUN2000-36KTL-M3, SUN2000-36KTL-M3, SUN2000-36KTL-NAM3, SUN2000-40KTL-M3
SUN2000-40KTL-M3, SUN2000-40KTL-NAM3, SUN2000-40KTL-NHM3, SUN2000-42KTL-M3
SUN2000-43KTL-INM3, SUN2000-44KTL-M3, SUN2000-50KTL-M3, SUN2000-30KTL-A
SUN2000-3KTL-L0, SUN2000-4KTL-L0, SUN2000-5KTL-L0

Sungrow CX Series:
SG36CX, SG60CX

Sungrow HX Series (Ethernet):
SG125HX, SG250HX

Sungrow RT Series:
SG3.0RT, SG4.0RT, SG5.0RT, SG6.0RT, SG7.0RT, SG8.0RT,SG10RT, SG12RT, SG15RT, SG17RT, SG20RT

Sungrow TCP - general revision of the driver, devices with Ethernet interface are compatible.

SMA Modbus:
Sunnyboy Storage (SBS3.7-10, SBS5.0-10, SBS6.0-10, SBS3.8-US-10, SBS5.0-US-10, SBS6.0-US-10)
Sunnyboy Storage 2.5 (SBS2.5-1VL-40)
Peak 3 (SHP 100-20, SHP 150-20, SHP 125-US-20, SHP 150-US-20, SHP 100-JP-20, SHP 150-JP-20)