[Beta][External] 6.1.2 Build 165 - 16.07.2024
Firmware file
firmware_base_beta_6.1.2 Build 165_2024-07-16
Release Notes
Firmware releases extend the range of functions and contain improvements for the security, stability and reliability of your Solar-Log product. Compatibility of component drivers is improved by adaptations. The following release notes contain the most important new features.
Component Drivers - New
Topic | Description |
---|---|
Ads-Tec StoraXe (Battery) | StorageRackSystem, PowerBooster |
INVT XG | New driver for INVT XG series inverter: XG17KTR, XG20KTR, XG22KTR, XG25KTR, XG30KTR, XG33KTR, XG36KTR, XG40KTR, XG50KTR, XG50KTRL, XG60KTR, XG60KTRL, XG66KTRL, XG70KTRL, XG100KTR-F, XG110KTR-F, XG136KTR-LF, XG136KTR-XF, XG1KTL-S, XG1.5KTL-S, XG2KTL-S, XG2.5KTL-S, XG3KTL-S, XG3.68KTL-S, XG4KTL-S, XG4.2KTL-S, XG4.6KTL-S, XG5KTL-S, XG3KTL-2M, XG3.68KTL, XG4KTL, XG4.2KTL, XG4.6KTL, XG5KTL, XG6KTL, XG7KTL, XG8KTL, XG10KTL, XG7KTL1, XG8KTL1, XG10KTL1, XG3KTR-S, XG4KTR-S, XG5KTR-S, XG6KTR-S, XG8KTR-S, XG9KTR-S, XG10KTR-S, XG11KTR-S, XG12KTR-S, XG15KTR1-S |
Component Drivers - Adjustments & Extensions
Topic | Description |
---|---|
MyPV | The Solar-Log now always sends the correct target power to an AC Thor with less than 3kW of heating rods. |
Delta | New models: M50A Flex, M100A Flex |
Ginlong | The new version of Solis-3P15K-4G is now also supported. |
GoodWe Hybrid |
|
Component Drivers - Bugfixes
Topic | Description |
---|---|
Ginlong | Fix detection for some Solis80K-5G models. |
GoodWe HT | Power management now works properly. |
Kostal Standard | Speedup Ethernet communication . |
ABB Sunspec | Negative production values are now ignored. |
Diehl AKO | In some cases the devices were shown as offline even they provided valid data. |
Fimer Sunspec | Negative production values are now ignored. |
Fronius SunSpec | Fix communication and data collection during the night. |
GoodWe Hybrid | Now also the data of a possibly second battery, which can be attached to the system, is monitored. |
GoodWe Sunspec | SunSpec models are read correctly, even if communication is unstable. |
Inepro | In some cases the yield was not recorded. |
Platinum | In some cases the devices were shown as offline even they provided valid data. |
SMA Sunspec | Increase communication stability. |
Solar-Log Pro Meter | In some cases the yield was not recorded. |
SolarEdge | Increase communication stability. |
SolarEdge Hybrid | The device is now always detected as hybrid system and not as normal inverter without a battery unit. |
Firmware adjustments, extensions & bug fixes
Topic | Description |
---|---|
Device configuration | For devices with MPP trackers the module field of the first MPP Tracker was not configurable. This issue was introduced with firmware 6.1.0. |
Legal Notices | Some Legal Notices for the used open source software were not shown in our local web-interface. This issue was introduced with firmware 6.1.0. |
Link Local Addresses | The Link Local address will not be lost when switching between static IP and DHCP. This issue was introduced with firmware 6.1.0. |
Networking | Gateway for Ethernet 2 can now be configured. |
NTP | The time now also gets corrected if the time difference between Solar-Log and the NTP server is very high. This issue was introduced with firmware 6.1.0. |
Decrease possibility of data corruption | An issue was found and fixed which leaded to data corruption in rare cases. |
PM Feedbacks | PM Feedbacks can now be configured even if no devices are configured. |
PM Feedbacks | Increase system stability in combination with invalid configurations. |
RS485 Bus Analysis | The RS485 Bus Analysis was not functional since 6.1.0. After starting the analysis, the operation never finished. |
System stability in case of corrupted data | Data which was detected as corrupt will now be recovered if possible, otherwise deleted as before this update. |
Yield calculation | Some devices provide us a daily yield, which gets reset on 0 o’clock. |