Firmware for Legacy Devices

Owned by Denis Noack
Last updated: Oct 25, 2023 by Denis Noack
2 min read

Exchanging your Legacy Device for a New Model

If you wish to exchange your legacy device for a new model (a Solar-Log Base unit), please contact us via the following form: Contact us | Solar-Log GmbH

Discontinuation of the Production of Legacy Devices

We have discontinued the following models and variants:
Solar-Log 200, Solar-Log 500, Solar-Log 1000 and associated versions BT, WiFi, BT WiFi, GPRS, GPRS PM+, WiFi PM+.  
As of March 31, 2021, firmware updates and licenses will no longer be available for these devices and the models will not receive any further support, for example in the event of a fault.

In addition, the following models (Solar-Log 250, Solar-Log 300, Solar-Log 1200, Solar-Log 1900, Solar-Log 2000) and their variants (BT, BT WiFi, GPRS, GPRS PM+, PM+, WiFi, WiFi PM+, Meter) will continue to receive support for critical errors and security gaps.

Due to strong customer demand regarding the Redispatch 2.0 adjustments, we would like to offer you the possibility to use a direct marketing license with your older device. However, please note the following disadvantages:

  • there is no further development of the drivers. Therefore, if an inverter has to be exchanged for a new model in order to convert the direct marketing, no driver will be provided for this.

  • If an inverter fails due to adverse circumstances, a new model cannot be integrated due to a lack of drivers.

  • the mentioned devices are not VDE compatible, because they do not meet the requirements of VDE-AR-N 4110. If conversion to the currently valid grid connection guidelines should occur in this course, a change to the Solar-Log Base is required.

  • the license fee is linked to the Solar-Log™ device and CAN NOT be transferred unless the device is within the warranty period. If the Solar-Log™ device fails outside the warranty period, a new license must also be purchased with the new Solar-Log™ device.

  • no warranty is given if the Solar-Log™ should fail when installing new firmware or a new license.

Download Firmware

The following firmware can be used to update our legacy devices (Solar-Log 200, 500 and 1000 and all their variants). The updates have to be done in the respective order.

Version

File

Version

File

Firmware 2.8.4 (build 56)

 

Firmware 3.6.0 (build 99) for devices with version 2.8.4-3.4.2

 

Newer Firmware Versions

You can find the newer firmware versions under the following link: Solar-Log™ Firmware Download