Enerest ToGo Version 8.1 - Release Notes EN

Owned by Stefanie Domzig
Last updated: Nov 05, 2024
3 min read

Released: 28.10.2022

‌

Configuration of Module Fields

Process in the App

In the plant settings, there is a new function to configure the module fields.

Similar to the portal, module fields can be assigned to each plant. This includes:

  • adding new module fields with name, tilt, orientation, and deviation monitoring

  • editing existing module fields and their name, tilt, orientation, and deviation monitoring

  • selecting from the list of unassigned components

  • deselecting components and reassigning them

The module fields configured in the app will be synchronized with the portal.

Modulefield configuration (2).jpg

 

 

Calibration Mode

 

The calibration mode uses the smartphone's sensors to determine the tilt and orientation of the module fields.

This mode can be used for either a single module field or globally. In global mode, data is first captured through the sensors and then assigned to the module fields.

There is a guide in the app on how to use the calibrator mode. The data can then be edited afterwards.

 

 

Global Search for Installers with Multiple Portals

In the search, plants can now be searched across portals.

Installers with multiple portals can now not only switch portals via the portal switcher but also find specific plants in the search and switch directly to the plant.

The search works with the plant name and the serial number.

Latest data in charts

 

 

In the charts we are showing the data from the latest interval in the list. This means the user don’t need to interact with the chart to see the latest data.

When clicking in the chart the summed up data is also shown in the list.

 

Compressing Images When Uploading

When uploading images to the documents of the plant, a notice has been added if the image is too large. There is now the option to compress the image and upload it in reduced quality, taking up less storage space.

Fixed Bugs 🐛 & Improvements 🚀

  • The portal switcher is only displayed when a user has more than one portal.

  • Archiving errors in the plant view is working again.

  • The timestamp in graphics has been fixed to the top bar, so the text box no longer hovers over the graphic.

  • The font size in charts has been adjusted so that more data can be seen at once in the table below the graphs.

  • Descriptions for the balance and yield report have been added in the global settings.